Deutsch
Please enter the article no. from our catalogue.
Recommended products:
rubber milk
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
With the latex milk, you can make burns and wrinkled skin. The milk has a low ammonia content. and is tinted skin color. The liquid latex is cured by air and heat.
Latex noses made from one piece
Latex sets consists of two parts of the nose and chin
You need the skin adhesive - Mastix
This product is compatible with:
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Bald-head form of red, solvent-resistant plastic in a standard size. Since the head is composed of 2 half-shells for manufacturing reasons, the seam may be slightly reworked, for example, with a nail file or sandpaper.
Customers who bought this product also bought the following products:
For bonding parts of latex, wool crepe, bald head, beard, etc.
For the removal of mastic / Carefully remove dab with a cotton swab
Derma Wax Spatula is used for taking Derma Wax and Eyebrow Plastic out of the jars and for applying and moulding them.
Always use a clean spatula.
Nose & Scar Wax Special flesh-colored wax to face changes, like broken nose, wounds, broad nose, etc. represent realistic.
Two components - 0.5 liter unit including release agents for polyurethane foam - for easy production of foams
Additional Products:
Liquid latex with the special effects, particularly burns and casts of noses, ears, etc. can be produced in a plaster mold.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Skin color, tinted liquid latex is a natural product. It is supplied ready for use. The production of blisters, burns and latex parts.
For the production of artificial skin, wounds, burns, etc. - Water-based freed of solvent
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Bald-head form of red, solvent-resistant plastic in a standard size. Since the head is composed of 2 half-shells for manufacturing reasons, the seam may be slightly reworked, for example, with a nail file or sandpaper.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
