Please enter the article no. from our catalogue.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Recommended products:
rubber milk
Bald-head form of red, solvent-resistant plastic in a standard size. Since the head is composed of 2 half-shells for manufacturing reasons, the seam may be slightly reworked, for example, with a nail file or sandpaper.
Glatzan L is a liquid plastic bald for making very thin bald heads.
Application:
Glatzan is in a well ventilated room with a brush thinly and evenly applied to a form of head and left to dry. After superficial drying, the process should be repeated at least three times to achieve the required thickness. The outer edge of the bald should only have one to two coats to achieve a very thin margin for fine over transitions. After applying the final coat should be bald by dry thoroughly (6-12 hours) before it is carefully and thoroughly powdering carefully removed from the forming head. The removal process starting at the neck and work your way slowly progressing towards forehead.
The thus prepared bald head should only be placed if they ausgedunstet well and only marginally smell of solvents.
Bald from Glatzan Kryolan, which are highly appreciated by makeup artists at work for film, television and theater.
Special rubber milk preparation for faking old, withered skin.
This product is compatible with:
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Customers who bought this product also bought the following products:
Picture size and color on "Detail" button
Grimas cream make-up is produced in wax-and oil-like basis to present. Ideal for up artists to the area Karakterer. - 15ml pot -
Ideal for small theaters and amateur stage - includes everything you need for basic equipment - 30% cheaper than if bought individually - Theater makeup - Contents: 5 x Cream Foundation, Creme Contour Wheel, Lip Color, Lining Colors, Highlight Schadow, 2x Creme Color Liners, Dry Rouge , Eyebrow Pencil, Lip Pencil, Black Pencil, Nose & Scar Wax. Hair Color, Translucent Face Powder, Spirit Gum, Spirit Gum Remover, Quick Cleanse Remover, Stage Glood, blush brush, Velourpuderquaste, Latexschwamm, Stoppelschwamm, Brush No. 0 and No. 6, eyelash, applicators.
900 gr - modeling mass for sculptural design of the masks motives -
For casting parts (prints) - For the manufacture of molds and negatives. - Also for the positive production (pour into a mold) of the highest quality and purity. - Suitable for direct application to the skin
This release agent is wax-based and particularly suitable for the separation of silicon to silicone, latex, in Firefox, etc.
An adhesive which remains sticky for several minutes after application. - For direct application to the skin (not mucosa). Suitable for foam latex, latex, wool crepe, etc. Lets face removed with water, multi-cleaner or soap
Additional Products:
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Kryolan Latexmilch is a liquid that can be generated with the special effects, particularly burns and casts of noses, ears, etc. in a plaster mold.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Bald-head form of red, solvent-resistant plastic in a standard size. Since the head is composed of 2 half-shells for manufacturing reasons, the seam may be slightly reworked, for example, with a nail file or sandpaper.
Skin color, tinted liquid latex is a natural product. It is supplied ready for use. The production of blisters, burns and latex parts.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Latex / Rubber milk / To shape casting of noses, etc. Place in a plaster / good after use / limited shelf life.
Liquid latex with the special effects, particularly burns and casts of noses, ears, etc. can be produced in a plaster mold.
For the production of artificial skin, wounds, burns, etc. - Water-based freed of solvent
Special rubber milk preparation for faking old, withered skin.